kdarling
Apr 27, 12:57 PM
My takeaway is this:
Section 222 (http://www.law.cornell.edu/uscode/uscode47/usc_sec_47_00000222----000-.html)of the Communications Act deals with carriers keeping user information private, including location, but of course that has nothing to do with phone OS makers such as Apple and Google.
Now I suspect that Congress will want to bring non-carriers under their wing as well.
Smartphones used to be a pretty sleepy backwater area, where the press rarely bothered much. Now they're daily headline news, under extra scrutiny.
Section 222 (http://www.law.cornell.edu/uscode/uscode47/usc_sec_47_00000222----000-.html)of the Communications Act deals with carriers keeping user information private, including location, but of course that has nothing to do with phone OS makers such as Apple and Google.
Now I suspect that Congress will want to bring non-carriers under their wing as well.
Smartphones used to be a pretty sleepy backwater area, where the press rarely bothered much. Now they're daily headline news, under extra scrutiny.
alust2013
Apr 24, 12:38 AM
You just have to catch them while they are there. Most likely will show up, you just have to watch for it.
buswheel
Jan 10, 12:16 AM
"meh" is the word that comes to mind.
I Agree
It's not like the iPhone wasn't expected, and for those outside the US it's all a bit too far away anyway to worry about.
Personally I was hoping for announcements in regards to leopard, iLife/iWork and future macbook options (Such as the 12" macbook pro... I have drooled over 12" powermacs and the like since i used my brothers in 2002)
Maybe with this quote ...over the next several months we're gonna be rolling out some awesome new stuff for the mac... I may not have to wait too long
I Agree
It's not like the iPhone wasn't expected, and for those outside the US it's all a bit too far away anyway to worry about.
Personally I was hoping for announcements in regards to leopard, iLife/iWork and future macbook options (Such as the 12" macbook pro... I have drooled over 12" powermacs and the like since i used my brothers in 2002)
Maybe with this quote ...over the next several months we're gonna be rolling out some awesome new stuff for the mac... I may not have to wait too long
wafl iron
Apr 7, 02:59 PM
That's only 1,258,291.2 gigabytes ... If each customer gets, say, 500 megabytes allocated, that's enough for 2,516,582 customers.
To be safe more like enough for 2.5 million customers @ 500 megabytes (which isn't very high, I would hope for more like 5000 megabytes/5 gigabytes, but then that's only enough for like 251,658 customers).
Point is, they better have another 10+ Pb along the way ...
You really think they allocate storage per user like allocated real estate per home owner?
deduplication + thin provisioning + compression applied to all that storage and your calculations are way off!
To be safe more like enough for 2.5 million customers @ 500 megabytes (which isn't very high, I would hope for more like 5000 megabytes/5 gigabytes, but then that's only enough for like 251,658 customers).
Point is, they better have another 10+ Pb along the way ...
You really think they allocate storage per user like allocated real estate per home owner?
deduplication + thin provisioning + compression applied to all that storage and your calculations are way off!
applemacdude
Dec 11, 01:52 AM
sent u an im
AppleCode
Aug 4, 08:05 AM
August Desktop
http://a.imageshack.us/img651/5083/screenshot20100804at902.png
http://a.imageshack.us/img651/5083/screenshot20100804at902.png
twoodcc
Nov 15, 03:49 PM
In doing some research, I found out that the basic Pioneer DVR-111 series SuperDrives Apple uses (some G4/all G5/all Intel towers) have the hardware capability to do LabelFlash direct-to-disk-surface label burning with the compatible disks. LabelFlash is the NEC-originated competitor to LightScribe, does basically the same thing on LightScribe-compatible disks.
On the Windows side, there are lots of sites out there that talk about flashing the ROMs to enable the feature for certain revision letters & firmware versions of the DVR-111 drives, while other versions of the drive (DVR-111L) are already fully capable (no clue on the ones Apple shipped with the Macs -- I stopped paying attention when I found there were ZERO software apps to support it on the Mac side that I could find).
Personally, I would really like to see Apple provide the feature as an OS-bundled utility app or added-feature in an existing Apple burner app (like the one in the iLife bundle).
As of March '05, Roxio also said they were going to support LightScribe (and possibly LabelFlash) in their future Mac releases, but I didn't see any mention of it in the feature sets of Toast & Toast Titanium 6 & 7, both of which were either updated or released after that date. Theoretically, they could also support LightScribe (if licensed) to burn images into unused portions of the dataside (as could any other burner app), to create a label effect (see http://www.yamahamultimedia.com/yec/tech/discta2_01.asp for details on the technology).
The epson CD-printer solution seems a bit silly for my uses, if I have no other use for the printer, mostly because of the consumables costs (and, indeed, with a big HP laser color printer here, I have zero other use for the Epson and am not thrilled by their putty-style inks and subsequent print head maintenance/cleaning processes that waste a goodly chunk of the ink reservior).
As for the sharpie comments, I create CD's & DVD's for clients and would prefer to present a more "professional image" on the disks than hand-written solutions. I was printing color labels through my laser printer and setting them in (usually using Avery CD labels), but some of the clients, esp. those with very thin portables seemed to be having issues with the thicker disks as a result, so I went back to sharpies as a general rule. The ability to do LabelFlash disks with hardware I already own would be great...
Cheers,
=-= The CyberPoet
interesting. i would also be interested in this, but depending on the cost of the disks. and i already have over 100 regular dvd+r's (on sale) waiting to be burned
On the Windows side, there are lots of sites out there that talk about flashing the ROMs to enable the feature for certain revision letters & firmware versions of the DVR-111 drives, while other versions of the drive (DVR-111L) are already fully capable (no clue on the ones Apple shipped with the Macs -- I stopped paying attention when I found there were ZERO software apps to support it on the Mac side that I could find).
Personally, I would really like to see Apple provide the feature as an OS-bundled utility app or added-feature in an existing Apple burner app (like the one in the iLife bundle).
As of March '05, Roxio also said they were going to support LightScribe (and possibly LabelFlash) in their future Mac releases, but I didn't see any mention of it in the feature sets of Toast & Toast Titanium 6 & 7, both of which were either updated or released after that date. Theoretically, they could also support LightScribe (if licensed) to burn images into unused portions of the dataside (as could any other burner app), to create a label effect (see http://www.yamahamultimedia.com/yec/tech/discta2_01.asp for details on the technology).
The epson CD-printer solution seems a bit silly for my uses, if I have no other use for the printer, mostly because of the consumables costs (and, indeed, with a big HP laser color printer here, I have zero other use for the Epson and am not thrilled by their putty-style inks and subsequent print head maintenance/cleaning processes that waste a goodly chunk of the ink reservior).
As for the sharpie comments, I create CD's & DVD's for clients and would prefer to present a more "professional image" on the disks than hand-written solutions. I was printing color labels through my laser printer and setting them in (usually using Avery CD labels), but some of the clients, esp. those with very thin portables seemed to be having issues with the thicker disks as a result, so I went back to sharpies as a general rule. The ability to do LabelFlash disks with hardware I already own would be great...
Cheers,
=-= The CyberPoet
interesting. i would also be interested in this, but depending on the cost of the disks. and i already have over 100 regular dvd+r's (on sale) waiting to be burned
nixoninajar
Mar 21, 02:57 PM
Is there a solution for Hamachi yet ?
The HamachiX Client won't work because parts of it rely on PowerPC processes, which are not supported by 10.7.
Thanks for answers !
The HamachiX Client won't work because parts of it rely on PowerPC processes, which are not supported by 10.7.
Thanks for answers !
thomaus
Apr 6, 12:01 PM
Per wikipedia, 1 Petabyte = 1000 terabytes
The better tidbit from Wikipedia is that Data from Star Trek had a capacity of 100 petabytes. So, Apple has a ways to go until they get something really interesting. iData?
Petabytes didn't exist in my dictionary until today. Thank you, MacRumors.
And it's a new one for the dictionary in Chrome on Windows, too. Petabyte gets the little red squiggly underline. But Safari on the Mac is hip to the lingo and knew the spelling.
The better tidbit from Wikipedia is that Data from Star Trek had a capacity of 100 petabytes. So, Apple has a ways to go until they get something really interesting. iData?
Petabytes didn't exist in my dictionary until today. Thank you, MacRumors.
And it's a new one for the dictionary in Chrome on Windows, too. Petabyte gets the little red squiggly underline. But Safari on the Mac is hip to the lingo and knew the spelling.
techfreak85
Jan 1, 10:17 PM
It is a MacBook Pro i7 it stays on 24/7 and always sits on my desk I rarely transport it anywhere. So leaving the application running won't be a problem
Ok... as for additional parameters, type
-smp 2 -advmethods
Make sure you set up your passkey. After completing 10 units with it, you should start getting bonus points.
Ok... as for additional parameters, type
-smp 2 -advmethods
Make sure you set up your passkey. After completing 10 units with it, you should start getting bonus points.
jdl8422
Jun 2, 10:05 AM
Here is the winning entry :)
228669
228669
paolo-
Aug 12, 01:19 AM
Here's mine, I modified a fairly plain wallpaper picture I found.
http://farm5.static.flickr.com/4137/4884629800_92ee54d8c3_b.jpg
Here's the background if you want it. Sorry, I had to up the jpeg compression quite a bit to make it small enough to upload. Oh you also have to strech to fill it as it's a weird proportion, but there's plenty of pixels so you aren't stretching.
http://farm5.static.flickr.com/4137/4884629800_92ee54d8c3_b.jpg
Here's the background if you want it. Sorry, I had to up the jpeg compression quite a bit to make it small enough to upload. Oh you also have to strech to fill it as it's a weird proportion, but there's plenty of pixels so you aren't stretching.
twoodcc
Jan 25, 05:35 PM
well guys i'm finally moved into the new house, and finally got internet going today. but the internet is terrible here, no cable - just DSL @3.0 mbps.
i just got 4 x 260's folding at the moment.
i will crank up some of the other rigs during the week or weekend.
during the move, for some reason my hard drive crashed on my main folding rig. i had to replace the hard drive, and i got it running as a hackintosh at the moment (while i didn't have internet; just to play around with) but i still have to install windows on it and get everything setup.
looks like everyone has been folding well while i've been out the last couple of weeks though. great job everyone! :)
we are now #62 overall though. hopefully we can continue to get better.
i just got 4 x 260's folding at the moment.
i will crank up some of the other rigs during the week or weekend.
during the move, for some reason my hard drive crashed on my main folding rig. i had to replace the hard drive, and i got it running as a hackintosh at the moment (while i didn't have internet; just to play around with) but i still have to install windows on it and get everything setup.
looks like everyone has been folding well while i've been out the last couple of weeks though. great job everyone! :)
we are now #62 overall though. hopefully we can continue to get better.
SchneiderMan
Feb 16, 02:40 PM
Who said they were models? They're a girl band. Too bad the photo wasn't vastly over-photoshopped for your enjoyment. :rolleyes:
Oh well then discard my past comment :o
Oh well then discard my past comment :o
notjustjay
Feb 7, 03:41 PM
I think that would depend very much on what your website is selling.
Lord Blackadder
Jan 10, 04:47 PM
VW figured out that bigger sells better in the mid-size four door sedan market, so they bumped it up. They decontented a bit, and they also moved production to the US (http://www.autoblog.com/2011/01/09/2012-volkswagen-passat-chattanooga-vw/). I guess VW has decided to move from "affordable German luxury" back to "The people's car".
It's a shame, really, because they are removing the very qualities that would make me shop for a VW. I would prefer a Golf though. As I said above, I wonder if Golf will maintain its more European character, or if it too will be dumbed-down and upsized.
It's a shame, really, because they are removing the very qualities that would make me shop for a VW. I would prefer a Golf though. As I said above, I wonder if Golf will maintain its more European character, or if it too will be dumbed-down and upsized.
WestonHarvey1
Apr 25, 08:36 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_2 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8H7 Safari/6533.18.5)
You might think my comment was stupid, or perhaps ludicrous, but please explain to me what about it was ignorant?
Not sure what's "ignorant" about it. My wife is so excited. She can't wait. Why wouldn't people think the white iPhone would appeal to women?
You might think my comment was stupid, or perhaps ludicrous, but please explain to me what about it was ignorant?
Not sure what's "ignorant" about it. My wife is so excited. She can't wait. Why wouldn't people think the white iPhone would appeal to women?
quagmire
Aug 2, 01:14 PM
Really amazing shot!
Thanks. I am proud of that picture. Not only was I lucky enough to get the timing right for a home run photo, I was lucky enough to witness and capture history with his 100th career home run. :)
Thanks. I am proud of that picture. Not only was I lucky enough to get the timing right for a home run photo, I was lucky enough to witness and capture history with his 100th career home run. :)
Magrathea
Mar 23, 04:26 PM
As has probably been said in the forums before, $25/hour is on the low side.
Backing up a little and going slightly off topic: being passionate about something and being able to make a living at it are two totally different things. I think all creatives like ourselves should take a mandatory 6 month business class before we start our businesses. If you have bills to pay as most of us do, you gotta figure out how much you need per month and then how many clients @ x dollars per hour you need. If your living costs are low and you're just starting out then you can pretty much work for any amount just to get the experience but when you get older and you have a mortgage, car payment, kids ($$$$$$) you many end up working for someone else.
Also, now-a-days, with the power of computers and software it's pretty easy for someone not so technical to sign up for a free blog such as Tumblr and Wordpress, grab a theme for $50 and have a website up and running for next to nothing. The internet has been growing at a steady rate, even in the economic downturn (big company fires techies and they start on online company) BUT when you have too many players in any market, the middle of the market falls out. i.e. you end up haviong folks working for $10-15per hour and others working for $100. This is not good for any of us!
Also, working for ourselves we're more lightly to be tempted to tell a client to piss off as we're the boss so remember to keep your cool and be professional at all times even if the client is a no good tire kicking ^*&^* face!! And for the love of dog, make every client sign a contract where you lay out exactly what and sometimes more importantly WHAT YOU ARE NOT going to be doing for them. Client is being an ass, gently remind the client of what is written in the contract. Client is being a real ass; off to small claims court you go - one of the only decent things about the legal system in this country is that you do have certain rights compared to say other places on the globe!
OK, putting my predisposed negative Brit attitude aside and yes this disjointed rant is now coming to an end :) Nothing is stopping you from getting a book on selling, yes, we've all got to be sales people or teaming up with other to get some sweet deals!
(And as all good teachers will tell your, I've neglected most of the above in my Web Design Business to my own detriment! I have also never taken a client to court in 10 years of web design but I did think one was a no good tire kicking ^*&^* face though!)
Cheers
Backing up a little and going slightly off topic: being passionate about something and being able to make a living at it are two totally different things. I think all creatives like ourselves should take a mandatory 6 month business class before we start our businesses. If you have bills to pay as most of us do, you gotta figure out how much you need per month and then how many clients @ x dollars per hour you need. If your living costs are low and you're just starting out then you can pretty much work for any amount just to get the experience but when you get older and you have a mortgage, car payment, kids ($$$$$$) you many end up working for someone else.
Also, now-a-days, with the power of computers and software it's pretty easy for someone not so technical to sign up for a free blog such as Tumblr and Wordpress, grab a theme for $50 and have a website up and running for next to nothing. The internet has been growing at a steady rate, even in the economic downturn (big company fires techies and they start on online company) BUT when you have too many players in any market, the middle of the market falls out. i.e. you end up haviong folks working for $10-15per hour and others working for $100. This is not good for any of us!
Also, working for ourselves we're more lightly to be tempted to tell a client to piss off as we're the boss so remember to keep your cool and be professional at all times even if the client is a no good tire kicking ^*&^* face!! And for the love of dog, make every client sign a contract where you lay out exactly what and sometimes more importantly WHAT YOU ARE NOT going to be doing for them. Client is being an ass, gently remind the client of what is written in the contract. Client is being a real ass; off to small claims court you go - one of the only decent things about the legal system in this country is that you do have certain rights compared to say other places on the globe!
OK, putting my predisposed negative Brit attitude aside and yes this disjointed rant is now coming to an end :) Nothing is stopping you from getting a book on selling, yes, we've all got to be sales people or teaming up with other to get some sweet deals!
(And as all good teachers will tell your, I've neglected most of the above in my Web Design Business to my own detriment! I have also never taken a client to court in 10 years of web design but I did think one was a no good tire kicking ^*&^* face though!)
Cheers
*LTD*
Mar 31, 05:49 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Mobile/8G4)
There's a remarkable amount of shortsightedness in this thread. But that's typical of the entire generic Wintel/PC world. No imagination. No ability to see possibilities as development of Post-PC era hardware continues. Or rather, iPad development.
There's a remarkable amount of shortsightedness in this thread. But that's typical of the entire generic Wintel/PC world. No imagination. No ability to see possibilities as development of Post-PC era hardware continues. Or rather, iPad development.
roadbloc
Mar 25, 11:06 AM
Don't bother Apple. Work on something else.
aaagat111
Aug 9, 11:08 PM
Added geektool scripts finally! I feel like my corners are balanced now. So many useful small apps too! Let me know what you guys think!
http://img6.imageshack.us/img6/5117/augustpost.png (http://img821.imageshack.us/img821/9918/picture1001406.png)
http://img6.imageshack.us/img6/5117/augustpost.png (http://img821.imageshack.us/img821/9918/picture1001406.png)
simsaladimbamba
Feb 1, 06:21 AM
Intel-based Macs: Resetting the System Management Controller (SMC) (http://support.apple.com/kb/HT3964)
or http://www.dragonone.com/products/macosx/pleasesleep/
or http://www.dragonone.com/products/macosx/pleasesleep/
mcrain
Mar 3, 02:46 PM
I'm not "relating" anything to slavery, it's the only example I can think of where the people you are defending actually made 100% of the income. That's the logical and almost actual extension of your argument. (I can't believe you're calling me out, when you just posted a poll asking if people think we should go back to an interpretation of the Constitution that would allow the blatently racist actions of the years following the aboloshment of slavery through the 60s).
You want to lower the tax burdens of people who have all the money, when everything is pointing to the wealth in this country being more and more consolidated in the hands of a very small group of people. In addition, everything is pointing to the economy and business being in trouble because of the very policy you are supporting.
You want to lower the tax burdens of people who have all the money, when everything is pointing to the wealth in this country being more and more consolidated in the hands of a very small group of people. In addition, everything is pointing to the economy and business being in trouble because of the very policy you are supporting.