citizenzen
Mar 4, 03:06 PM
5P, Let's boil this down to two questions...
1. Is it true that wealth is getting more and more distributed into the hands of the rich?
2. Does/should the government play any role in the proportioning of that wealth?
1. Is it true that wealth is getting more and more distributed into the hands of the rich?
2. Does/should the government play any role in the proportioning of that wealth?
TooMuch
Mar 31, 02:58 PM
Jump over to XDA and search. It's there. Not the most fully baked solution yet, but at least it's something.
Here is a list of things that do and do not work. like i said earlier, until google finds a way to update all the phones to the latest OS. Android sucks!!
With that said, a short list of things that DO work.
Radio works fully - Calling, SMS, Data
Bluetooth works for music only.
Wifi works fully.
Sensors work, but may be slow. Run /system/bin/sensorcalibutil_yamaha in terminal or via adb, place the phone on a flat surface, and hit Enter. Reboot the phone and sensors will function at normal speed.
What does NOT work ::
GPS
Camera
HW Acceleration in UI and in video, etc.
and 4G (might never work)
If this is acceptable to you, I have a slightly used bridge for sale. You can have it for real cheap.
Here is a list of things that do and do not work. like i said earlier, until google finds a way to update all the phones to the latest OS. Android sucks!!
With that said, a short list of things that DO work.
Radio works fully - Calling, SMS, Data
Bluetooth works for music only.
Wifi works fully.
Sensors work, but may be slow. Run /system/bin/sensorcalibutil_yamaha in terminal or via adb, place the phone on a flat surface, and hit Enter. Reboot the phone and sensors will function at normal speed.
What does NOT work ::
GPS
Camera
HW Acceleration in UI and in video, etc.
and 4G (might never work)
If this is acceptable to you, I have a slightly used bridge for sale. You can have it for real cheap.
animatedude
Apr 11, 03:11 AM
???:(
katie ta achoo
Dec 19, 12:01 AM
aww, that's cute!
and Kobushi, if anyone could animate THAT, I think Lacero could.
He's got the skills that we're all jealous of. I wish I could be as "Lacero" as she.
and Kobushi, if anyone could animate THAT, I think Lacero could.
He's got the skills that we're all jealous of. I wish I could be as "Lacero" as she.
Over Achiever
Aug 28, 06:05 PM
Uhh...
We all know that its a fake.;)
At least most of us do...:p
We all know that its a fake.;)
At least most of us do...:p
mackensteff
Mar 22, 06:34 PM
Thanks again for the reply. The only problem is I only have the pdf files (or the .vsd files) Right now I am just cutting and pasting the text into word and working on the format there, and finally placing in illustrator. It works, but is tedious and my stubborn streak can't leave it alone!
PS now I combined all the individual pdf files into one, just to streamline the cutting and pasting. In trying to past from Preview into word I now get:
which I have quite frequently when I combine several pdf files into one; each file is fine, but when combined the text doesn't transfer. I think this comes from the quartz filter Preview when saving a new pdf document.
Arggg Font problems!!
PS now I combined all the individual pdf files into one, just to streamline the cutting and pasting. In trying to past from Preview into word I now get:
which I have quite frequently when I combine several pdf files into one; each file is fine, but when combined the text doesn't transfer. I think this comes from the quartz filter Preview when saving a new pdf document.
Arggg Font problems!!
iFiend
May 4, 09:21 AM
Well, it must have worked as i've installed a newer version and all is good and the old animation isn't running anymore, thanks iFiend :)
Glad I could help :)
Glad I could help :)
quicksilver77
Feb 6, 08:48 AM
Will this RAM work in the above mentioned MINI? I want to take it to at least 2gb. Not sure if its worth it to go to 3gb. Can i install this 2gb module and leave one of the 512mb in as well?
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820145172
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820145172
chopper dave
Oct 18, 10:19 PM
Anyone know if the UM computer showcase will have it on launch day? I like the apple store, but not enough to drop an extra $50. Yes, I'm a student.
princealfie
Dec 9, 12:46 AM
Interesting ad. :cool:
njaremka
Apr 18, 07:38 AM
...If you're an apple fan wanting to play with the DP, then no its probably not worth paying the price for a developer's account with apple
full sleeves tattoos to be
Fake Sleeve Tattoos in
Sleeve Tattoos Ideas Tips
Tribal Half Sleeve Tattoos
his tattoo sleeves.
Authentic Sleeves Brand Tattoo
Awesome Spider Sleeve Tattoo
half sleeve tattoo ideas
Sparky's
Jul 10, 10:27 AM
I'm running the exact same WU on my G3 (now with a Sonnet G4-500 CPU installed) and I'm at 2.5% with 12 days left. Friday it said 1.8% with 22 days left. Go figure. I just let it do it's thing and wait for the next one.
I have Increase v2.0 running and I know in the preferences you can limit the size of the work units you allow your CPU to download. I chose "no preference" as opposed to "standard" and "no deadlines". As a result I get these 200+ point Gromaks and Tinkers but also get a few 35-60 point 2 day wonders.
I have been folding since April of 2003 on my "G4" and a few weeks ago added 2 machines at work a G4-800 and our new DELL we use for PC based work (I'm a Graphics professional). I have now seen my "Status" on the team 3446 list go up to #259 right now and rising. I can't wait to ad the other new DELL we just got and I'm waiting arrival of a new G5 Dual :rolleyes:
Fold on
I have Increase v2.0 running and I know in the preferences you can limit the size of the work units you allow your CPU to download. I chose "no preference" as opposed to "standard" and "no deadlines". As a result I get these 200+ point Gromaks and Tinkers but also get a few 35-60 point 2 day wonders.
I have been folding since April of 2003 on my "G4" and a few weeks ago added 2 machines at work a G4-800 and our new DELL we use for PC based work (I'm a Graphics professional). I have now seen my "Status" on the team 3446 list go up to #259 right now and rising. I can't wait to ad the other new DELL we just got and I'm waiting arrival of a new G5 Dual :rolleyes:
Fold on
tjcampbell
Mar 22, 06:01 AM
I've been using PSP ware since pretty much the launch of the PSP. It's an excellent application. Highly reccommend it. Cheers, T
stubeeef
May 27, 11:28 AM
Someone needs to convince a game developer to port the code over as a game disk.
Rather than spend $200 on the HD linux kit you could spend ~$40 on the disk and a memory card, and just pop it in and fold.
That is a great idea.
Rather than spend $200 on the HD linux kit you could spend ~$40 on the disk and a memory card, and just pop it in and fold.
That is a great idea.
bumknee22
Apr 12, 08:38 PM
I am also trying to set up a vpn tunnel so that I can view my cablevision channels on my Ipad while away from home. I followed the instructions but can't get it to work. I am using EASYVPN on an IMAC , but when i try to connect from my Ipad, i get the following messages logged in EasyVPN
2011-04-12 21:26:40 EDT Incoming call... Address given to client = 192.168.1.133
Tue Apr 12 21:26:40 2011 : PPTP incoming call in progress from '192.168.1.1'...
Tue Apr 12 21:26:40 2011 : PPTP connection established.
Tue Apr 12 21:26:40 2011 : Using interface ppp0
Tue Apr 12 21:26:40 2011 : Connect: ppp0 <--> socket[34:17]
Tue Apr 12 21:27:10 2011 : LCP: timeout sending Config-Requests
Tue Apr 12 21:27:10 2011 : Connection terminated.
Tue Apr 12 21:27:10 2011 : PPTP disconnecting...
Tue Apr 12 21:27:10 2011 : PPTP disconnected
2011-04-12 21:27:10 EDT --> Client with address = 192.168.1.133 has hungup
Any suggestions as to what I'm doing wrong?
2011-04-12 21:26:40 EDT Incoming call... Address given to client = 192.168.1.133
Tue Apr 12 21:26:40 2011 : PPTP incoming call in progress from '192.168.1.1'...
Tue Apr 12 21:26:40 2011 : PPTP connection established.
Tue Apr 12 21:26:40 2011 : Using interface ppp0
Tue Apr 12 21:26:40 2011 : Connect: ppp0 <--> socket[34:17]
Tue Apr 12 21:27:10 2011 : LCP: timeout sending Config-Requests
Tue Apr 12 21:27:10 2011 : Connection terminated.
Tue Apr 12 21:27:10 2011 : PPTP disconnecting...
Tue Apr 12 21:27:10 2011 : PPTP disconnected
2011-04-12 21:27:10 EDT --> Client with address = 192.168.1.133 has hungup
Any suggestions as to what I'm doing wrong?
dante@sisna.com
Jan 23, 05:21 PM
I just had an Art Director for a Stop Motion Animation Movie Company leave our shop. We ran a bunch of 3x6 foot fine art prints for her for the Sundance Film Festival (we are in Utah).
She and her art team created the posters digitally from a series of still photos taken with a Nikon D-300. The still photos were of painted sets and set characters. The paints they used were very pastel-like and bright. They then pushed these prints and added text in RGB format in Illustrator and Photoshop.
Their display was a Dell 30" high Color.
We showed them proofs on a calibrated high gamut HP LP3065 and then on an ACD 23".
Our printers for this job are fully calibrated (closed loop color) HP Z3100, Colorspan Displaymaker, and HP DesignJet 130 both with EFI Designer XL RIPS with full Spectrophotometer Support.
The art director was highly bummed that the InkJet Prints would not match her Dell or our HP LP3065 (both very wide gamut). She had no background in Color Management and no understanding of RGB versus CMYK, if you can imagine this!!
She kept moaning that she needed to find a way for the print to match her display. We kept telling her to refer to the ACD 23 for a more realistic expectation as to how the prints would look in final form.
It was amazing to me her lack of understanding of color gamut and how cmyk printing cannot match today's HC or High Gamut Monitors.
I offer this to this thread as there are a lot of people complaining that Apple's ACD's are "out-of-date," etc.
Actually, they are not: they are simply technology that is very targeted at a group of professionals that Apple use to covet as its "own:" print professionals and print-based photographers.
While Apple has moved past this market heavily into entertainment and broadcast video, their monitors have remained focused on this area. Surely they will update them. But for now, please understand why Apple's ACD's remain as they are and that they still have a large user base that actually needs and prefers these gamut specs.
I am of the belief that a creative shop should have many monitors as we do: some high gamut and some standard SWOP gamut, like ACD's.
We moved far beyond print a long time ago: we focus now on Video, CMS-based web development and broadcasting, and Flash. High Gamut is great for this (though not without its risks even for this market as many end-users have older, low gamut LCD's).
But to call Apple's ACD's out of date is just pain misinformation and lack of knowledge on a complex and tricky subject.
She and her art team created the posters digitally from a series of still photos taken with a Nikon D-300. The still photos were of painted sets and set characters. The paints they used were very pastel-like and bright. They then pushed these prints and added text in RGB format in Illustrator and Photoshop.
Their display was a Dell 30" high Color.
We showed them proofs on a calibrated high gamut HP LP3065 and then on an ACD 23".
Our printers for this job are fully calibrated (closed loop color) HP Z3100, Colorspan Displaymaker, and HP DesignJet 130 both with EFI Designer XL RIPS with full Spectrophotometer Support.
The art director was highly bummed that the InkJet Prints would not match her Dell or our HP LP3065 (both very wide gamut). She had no background in Color Management and no understanding of RGB versus CMYK, if you can imagine this!!
She kept moaning that she needed to find a way for the print to match her display. We kept telling her to refer to the ACD 23 for a more realistic expectation as to how the prints would look in final form.
It was amazing to me her lack of understanding of color gamut and how cmyk printing cannot match today's HC or High Gamut Monitors.
I offer this to this thread as there are a lot of people complaining that Apple's ACD's are "out-of-date," etc.
Actually, they are not: they are simply technology that is very targeted at a group of professionals that Apple use to covet as its "own:" print professionals and print-based photographers.
While Apple has moved past this market heavily into entertainment and broadcast video, their monitors have remained focused on this area. Surely they will update them. But for now, please understand why Apple's ACD's remain as they are and that they still have a large user base that actually needs and prefers these gamut specs.
I am of the belief that a creative shop should have many monitors as we do: some high gamut and some standard SWOP gamut, like ACD's.
We moved far beyond print a long time ago: we focus now on Video, CMS-based web development and broadcasting, and Flash. High Gamut is great for this (though not without its risks even for this market as many end-users have older, low gamut LCD's).
But to call Apple's ACD's out of date is just pain misinformation and lack of knowledge on a complex and tricky subject.
player9
Sep 14, 12:03 AM
I did some more research on this and it appears that we will have to wait probably for the Linux programmers to port Foomatic to OSX. That is if Epson does not release a driver eventually.
I tried to follow the directions on this site, but this assumes that you are running Linux and that Foomatic is already installed, along with Ghostscript and CUPS. I was able to apply the PPD file for the EPL-5700 to my printer and see it in Print Center but the in between framework is missing: the cupsomatic script and Foomatic system. I can print but the printer does not respond, so CUPS is not sending the data to the printer.
I couldn't figure out where to put the cupsomatic script since OSX does not have the directory substructure of redhat.
http://www.linuxprinting.org/foomatic.html
http://www.linuxprinting.org/cups-doc.html
I also found this site helpful:
http://www.danka.de/apple-cups-en/
I tried to follow the directions on this site, but this assumes that you are running Linux and that Foomatic is already installed, along with Ghostscript and CUPS. I was able to apply the PPD file for the EPL-5700 to my printer and see it in Print Center but the in between framework is missing: the cupsomatic script and Foomatic system. I can print but the printer does not respond, so CUPS is not sending the data to the printer.
I couldn't figure out where to put the cupsomatic script since OSX does not have the directory substructure of redhat.
http://www.linuxprinting.org/foomatic.html
http://www.linuxprinting.org/cups-doc.html
I also found this site helpful:
http://www.danka.de/apple-cups-en/
danp
Oct 25, 07:33 AM
Bad news for iTunes Music Store.
Can only be a good thing for iPod and its users, tho?
Can only be a good thing for iPod and its users, tho?
wfarr08
Apr 13, 02:57 PM
hey m.r forums community
I was wondering wether i had to wipe my mac pro's HD before upgrading or can i just do a direct upgrade. thanks for all your help...we've had some major problems with cross compatibilty.
WFarr08 And the mac team at Kelvin High school in winnipeg manitoba
I was wondering wether i had to wipe my mac pro's HD before upgrading or can i just do a direct upgrade. thanks for all your help...we've had some major problems with cross compatibilty.
WFarr08 And the mac team at Kelvin High school in winnipeg manitoba
M-5
Apr 9, 01:58 PM
Yeah, "working on finishing" is very different from "putting on the finishing touches."
:(
:(
jaw04005
Apr 17, 08:46 AM
Official Apple employees have an Apple symbol under their name on the Apple Discussion boards.
michaelrjohnson
Aug 13, 03:25 PM
Looks good!
Mochi Hana
Nov 5, 10:13 AM
http://www.onemorething.nl/uploads/community/96646d3905f05770a2fc3279f1b4b5479ab6b585_0.png
Could you possibly post a link to your wallpaper? It's really pretty. :)
Could you possibly post a link to your wallpaper? It's really pretty. :)
macintoshmartin
Jun 2, 07:29 PM
I don't think it's the gold contacts, I have cleaned both of them them with some alcohol, so maybe I just need to replace the print head.